GLORYAAC & BUILDING MATERIALS · DAR ES SALAAM
Products · Range 02 · BLD Brand Series
Sealants, sixteen models, one series
The BLD Brand Series as listed on our sealant site: neutral and acetoxy silicone, alcohol-cure mirror grades, MS polymer, polyurethane and two-component structural silicone. Filled in Kigamboni.
Range 02 — BLD Brand Series
Sixteen models, grouped by chemistry
Two-component systems first, then the single-component grades. Every card opens its own page with the full data sheet.
Insulating-glass secondary seal
Two component · A : B = 10 : 1Second-stage bonding and sealing of insulating glass units on factory glazing lines. Cure speed is adjustable and deep sections cure fast, which suits an automated line.
Pails and drums; A and B supplied as a set
Structural assembly sealant
Two component · high modulusStructural assembly and sealing of glass and aluminium in curtain walls and factory glazing. Extrudes well from +5 °C to +40 °C, so it works through a Dar es Salaam morning as well as a cold workshop.
Pails and drums; A and B supplied as a set
Single component
Fourteen grades. The code stays the same whether you buy a pallet or a container.
Structural silicone sealant
Structural glazing in curtain walls, attachment of panel systems, two-sided structural glazing, masonry expansion joints.
One component · neutral · −50 to +150 °C · structural + weather
Class 50 weatherproof silicone
Glass curtain wall sealing and joints between glass, ceramics and metal plates, where joints must absorb large thermal and wind movement.
Alkoxy cure · class 50 movement · non-hardening
Weatherproof silicone sealant
Curtain wall joints, expansion joints in concrete, plastic and metal, exterior insulation systems, perimeter joints.
One component · neutral · ±35% movement · −50 to +150 °C
Stone silicone sealant
Stone and masonry facades: granite, marble and cladding, resistant to UV, ozone, rain and hail.
One component · neutral · −40 to +120 °C · 1.46 g/cm³
MS sealant (modified silicone)
Interior joints and cracks — ceilings, kitchens, windows, walls — and bonding metals, PVC and polyester. The one to use where the joint has to take paint.
MS polymer · low VOC · paintable · non-staining
Mirror silicone sealant
Copper- and metal-coated mirror glass, mirror doors, and assembly of high-grade system doors and windows.
Alcohol cure · non-corrosive · very low shrinkage
Aquarium and large-panel glass sealant
Large panel glass, glass skylights, fish tanks, showcases and glass cabinets.
Acetoxy cure · fast · high elasticity
Anti-fungus silicone sealant
Kitchens and bathrooms, wet-area sealing, windows and doors, interior edge finishing in hot and humid conditions.
Mildew resistant · neutral · kitchen and bath
Tile grout
Wall and floor tile joints indoors and out, especially balconies, bathrooms and kitchens.
Waterproof · anti-penetration · mildew-proof · cures hard
Nail-free construction adhesive
Bonding panels, board and trim without fixings, including two non-porous materials.
Shear > 2 MPa · skin 10–15 min · 24-month shelf life
Fire-retardant silicone sealant
Joints and penetrations where fire performance is specified alongside normal weatherproofing.
One component · neutral · −40 to +120 °C · 1.36 g/cm³
Acrylic weatherproof sealant
Exterior joints with low movement, where an acrylic rather than a silicone is specified.
One component acrylic · −40 to +120 °C · 1.55 g/cm³
Polyurethane sealant
Concrete external wall joints, artificial panel joints, aluminium gusset plate to cement wall.
PU · high movement · non-powdering · non-sagging
General purpose silicone sealant
General glazing, glass bonding, and sealing between aluminium and glass windows; non-porous surfaces.
Acetoxy cure · translucent · 4–40 °C application